Skip to content
Khattco International. Minerals. Resources. Value.
K-GCC-C2

Fine Coated Ground Calcium Carbonate

1750 mesh, D50 2 µm, D97 max 8 µm.

Fine white powder in a scoop, shown for illustration
Fine white powder in a scoop, shown for illustration

The five grades look alike to the eye. What sets them apart is particle size, shown in the specification below. Photographs are for illustration.

K-GCC-C2

Fine Coated Ground Calcium Carbonate, 1750 Mesh, Stearic Acid Coated

K-GCC-C2 is ground to 1750 mesh and then surface treated with stearic acid. Its median particle size is 2 µm and its top size is 8 µm.

The coating repels moisture and helps the powder mix evenly into polymers.

Mesh
1750 mesh
D50
2 µm
D97
max 8 µm

Fineness

What this fineness is suited to.

A D50 of 2 µm and a D97 of up to 8 µm gives a fine, even filler with few coarse particles. Combined with the stearic acid coating, it suits PVC pipes, profiles and cables, plastic film, masterbatch, rubber and sealants.

  • Mesh

    1750 mesh

    Mesh is a sieve based name for fineness. A higher mesh number means a finer powder.

  • D50

    2 µm

    D50 is the median particle size. Half of the particles are smaller than this figure and half are larger.

  • D97

    max 8 µm

    D97 is the size below which 97% of the particles fall. It describes the coarse end of the powder, so a lower D97 means fewer large particles.

Specification

Specification table.

K-GCC-C2 specification
PropertyValue
Product codeK-GCC-C2
TypeCoated, stearic acid
Mesh1750 mesh
D50 (median particle size)2 µm
D97 (coarse end)max 8 µm
CaCO3 content97% minimum
Whiteness93% or higher
Brightness93% or higher
Moisture0.3% maximum
Oil absorption10 to 16 g per 100 g
pH9 to 10
Specific gravityAbout 2.7
Mohs hardness3
Stearic acid coatingAbout 1% by weight

Mesh, D50 and D97 define the grade. Other values are typical. A technical data sheet and certificate of analysis are provided with every quotation.

Benefits

Key benefits.

  • Stearic acid coating repels moisture
  • Disperses evenly in polymers
  • Fine, with a top size of 8 µm
  • Flows well in processing equipment

Applications

Where it is used.

Each use links to its section on the Applications page.

Packing

Packing options.

  • 25 kg and 50 kg polypropylene bags
  • Jumbo bags, 1 to 1.25 tonne
  • Palletised or loose loaded
  • Custom branding on request

See Quality and Logistics for shipping terms and documents.

Tell us what you need and we will send a quotation.

Send the product, grade, quantity and destination port. A technical data sheet and certificate of analysis are provided with every quotation.

Request a QuoteServices [at] khattco.com.au